ALS-210 LITE - Club Console and Light System

ALS-210 Lite  1 CHANNEL, 1 DECK, GRAPHICAL INTERACTIVE EQ

Introduction :
====================================================================

ALS is most powerfull lighting system in second life.

Its  is so realistic and flexible, It gives you all the options you need ....

========================================

Quick Start Guide for    *   ALS-210 Lite Console  *
                                                                          
============

Here i will explain how ALS-210 Value Console  works

THIS CONSOLE IS PRIM TOUCH CONSOLE DONT EXPECT ANY MENU

You must touch it ( click ) to work

--On the down left side of the console is the power button

--Nexto to the power  you have some option
1)OWNER-Only owner can use the console
2)Everyone-All can use the console
3)Access list-Only  authorized person can use the console (Edit console--->more--->content----->open access list note---->Write the avatar name.)
4)Group-Group members can use the console

--With the console   comes  1 ALS Robotic Light 12CH

On the lights are some numbers 1 to 12 these are the channels with the value console you can control only one channel.

To configure the channel u must click the side of the light where there is a number  ,if u touch the upper side of the number it will increase if the down side it will dicrease.ALso on  the console  you must choose the same channel with the ligths .To control more channels you can buy to value consoles or the pro console
FOR EXAMBLE

 4 lights are set to no1 channel   to make them work you should have no1 in console too. Its on the up left side.

----About EQ's

With eq you can configure the lights

----Prim Lighting------
Timer=Is the generic timer, this controles how fast or slow the changes to the lights will made
Rotation=the rotation speed of the lights
Length=the length of the prim light beam
Width=controles the prim's cone width
Degrees= the positiion of the robotic head will move in degrees
Interupt= this is for the flasing , this timer will make the lights turn on and off if the button lower of the slider is active

------Particles-------
Width= the particles cones angle
Lenght=how far the particles will go

-----Color----
The color mixer is usefull to create your favorite color you want from the light to have

Here u can choose a combination of colors for the light.

============================================================================